Skip to main content

Back of the module & connectors

Representation of the back of the module

image.png

Power Standard eurorack power -12V / GND / +12V , Red stripe of the ribbon is on the left
MicroUSB Micro USB socket, to connect to a computer, used to update the firmware
Extension

Extension port, used to plug the CV/Gate & Midi extension
 

Warning ! The ribbon cable must be plugged in the right direction. There is a "RED" inscription on the PCB which indicates where the red stripe of the ribbon should be.

 

expander back.png

Warning ! The ribbon cable must be plugged in the right direction. There is a "RED" inscription on the PCB which indicates where the red stripe of the ribbon should be.

Back to top