Sample & Hold

A Sample & Hold virtual circuit that reads an input in real time (external or internal) and takes a "snapshot" of this input whenever it receives a trigger signal. This snapshot is a fixed value that will be output until a new "snapshot" is taken. On any page of the S&H modulator, a visual display provides a rough outline of the source signal and the sampled value. 

 Main screen of the Sample & Hold modulator 

 On the real-time chart displayed on the screen, the input source is shown in a faded background, while the sampled output appears in black. 

 The trigger parameter has a small indicator that lights up whenever a trigger signal is received. 

 

 S&H Tab 

 This section allows you to configure the basic parameters for the Sample & Hold: 

 

 

 

 Source 

 Trigger 

 - 

 - 

 

 

 

 

 The signal to be sampled can be internal noise, any CV input, modulators from any voice or global sources, Macros, or even any Voice output. Additionally, it includes a selection of MIDI parameters such as Velocity, Key Follow, Aftertouch, and ModWheel. 

 The S&H can be triggered by any of the Gate inputs, the Voice trigger, or various divisions and multiplications of the MIDI clock. A small dot indicator will activate each time a trigger is received, signaling that a new sample has been taken. 

 - 

 - 

 

 

 

 

 Output Tab 

 This section allows you to shape the S&H signal before it is sent to modulation targets: 

 

 

 

 Polarity 

 Gain 

 - 

 - 

 

 

 

 

 

 Select the polarity of the S&H signal: 

 

 Bipolar 

 Unipolar Positive 

 Unipolar Negative 

 

 

 Adjust the level of the S&H signal. This parameter can be modulated. 

 - 

 -